Tractor body parts names change with the country. A British buyer orders a bonnet and a pair of mudguards. An American buyer asks for the hood and fenders. In India the same panels are often listed with a Hindi word added, such as patta or patra. They are the same steel parts. This guide puts every name side by side, so you can order the right panel the first time.
It is written for restorers, dealers and parts buyers in the UK, Ireland and the USA who buy from Indian factories. Each row links to a real part, so you can check the photo against your tractor.
Last updated: 29 October 2026
Tractor body parts names: the full table
The table lists the tractor body parts names for the sheet metal panels on a typical vintage or utility tractor. The first column is the British name, which UK parts catalogues use. The second is the name in American catalogues. The third shows how Indian listings name the same part, where they differ.
| British name | American name | Indian listing name | What it does | Example part |
|---|---|---|---|---|
| Bonnet (bonnet top) | Hood | Bonnet | Covers the engine and fuel tank from above | Ferguson TE20 bonnet top |
| Bonnet side panel | Hood side panel | Side bonnet patta | Closes the side of the engine bay below the bonnet | Swaraj side bonnet patta N/M |
| Bonnet kit | Hood kit | Bonnet kit | Bonnet top, side panels and grille sold as one set | Ferguson TE20 bonnet kit |
| Front grille | Grille | Front grill | Lets air reach the radiator and guards it from stones | Ferguson TE20 grille set |
| Front T bar | Grille T bar | T bar | The centre bar that carries the grilles on a TE20 | Ferguson TE20 front T bar |
| Nose cone | Nose cone, front grille shell | Nose cone | The one-piece front shell that holds the grille panels | Fordson Major nose cone |
| Mudguard, also wing | Fender | Mudguard | Covers the rear wheel and keeps mud off the driver | Ferguson TE20 fender and bracket |
| Mudguard shelf | Fender shelf | Fender shelve | The flat top of the mudguard, often with its bracket | TE20 fender shelf with bracket |
| Extension mudguard | Fender extension | Extension mudguard | A wider guard for larger tyres | MF135 extension mudguard |
| Footplate, also step plate | Step plate, running board | Footplate | The plate the driver stands on and steps up from | MF135 footplate kit |
| Dash panel | Dash, instrument panel | Dashboard, dashboard patra | Holds the gauges and switches in front of the driver | MF135 dash panel |
| Tool box | Tool box | Tool box | A steel box for the tractor’s tools | MF135 tool box |
| Battery cover | Battery cover | Battery cover | Covers the battery | MF135 battery cover |
| Fuel tank cover | Fuel tank cover | Diesel tank cover | Covers the fuel tank | Swaraj diesel tank cover N/M |
All of these panels together are called the tractor tinwork in the UK, or the sheet metal in the USA. The rest of this guide explains the tractor body parts names that cause the most wrong orders.
Bonnet or hood: the top of the tractor
In the UK and Ireland the panel over the engine is the bonnet. In the USA it is the hood. Both words mean the same part, so a quote for one is a quote for the other.
The bigger risk is the scope of the word. On many tractors the “bonnet” is more than one panel. For example, a UK catalogue for the Ferguson TE20 lists the bonnet top, the left and right side panels, the grille set and the T bar as separate items. It then sells the bonnet runner, stay, hoop and pivot bolt as fixings, and the complete bonnet kit as an assembly.
So before you ask for a price, say which one you need:
- Bonnet top: the single curved top panel only.
- Bonnet side panel: one side, left or right. Say which.
- Bonnet kit: the set of panels. Ask what the kit contains, because kits differ by model and by seller.
- Fixings: bolts, hinges, rubbers and handles are usually sold apart from the steel.

Our Ferguson TE20 bonnet kit guide shows how the TE20 panels fit together.
Mudguard or fender, and where wing fits in
A mudguard is the cover over a wheel that stops mud and water being thrown up. Wiktionary gives fender as the US word and wing as the UK one. On tractors, however, British buyers mostly say mudguard. Wing is common on cars, and some UK catalogues use it for tractors too. The TE20 page linked above sells a “wing skin and bracket” next to a “mudguard / fender skin”.
In other words, the answer to mudguard or fender is simple: mudguard, fender and wing can all mean the same rear panel. Three other words matter more when you order:
- Skin: the curved outer panel only, without brackets.
- Shelf: the flat top section. Indian listings often spell it “shelve”.
- LH or RH: mudguards are handed. Left hand and right hand are seen from the driver’s seat, facing forward.
Also check whether the price is for one mudguard or a pair. Many listings price one side.
Tractor tinwork and sheet metal: the whole set
Tractor tinwork is the British collector’s word for all the pressed steel body panels: bonnet, side panels, grille, mudguards, footplates and dash. The panels are steel, not tin, but the name has stuck. For instance, one UK restoration article on Agri Hub says enthusiasts like tractors with genuine tinwork in good condition, and that reproduction tinwork has improved over the years.
American sellers say sheet metal instead. A US parts site for early Ford tractors, for example, sorts its sheet metal into hood, grille, fenders and running boards. When a US buyer asks for “8N sheet metal”, they mean the same group of parts a UK buyer calls tinwork.
Footplate, step plate or running board
The plate the driver stands on has three names. UK catalogues call it a footplate. Ferguson owners in North America often say step plate, and the Ferguson Enthusiasts of North America use both words in one post. On Ford N series tractors the American catalogues say running board.
The same post also shows why the model matters more than the name. UK TE20 step plates differ from the TO30 and TO35 plates. The TO30 and TO35 plates have a series of holes with a raised ridge. By contrast, the TO20 style plates that dealers sold for the TE20 had a solid diamond tread. So send the model and a photo, not only the word.
Our footplate listed for the FE35, TE20, TEA, TED and 35 is one example. Check the photo against your tractor before ordering.
Nose cone and front grille
Most tractors have a grille. Some, such as the Fordson Major, have a nose cone. This is the rounded one-piece front shell, and the mesh grille panels sit inside it. The same UK catalogue groups nose cones together with grilles and front panel kits, and lists them for Fordson, Ford, Massey Ferguson and other makes.
Therefore, if you ask for a “Fordson Major grille”, the seller may quote the mesh panels only. Ask for the nose cone if you need the whole shell. Our Fordson Major nose cone is the shell.
Indian trade names: patta, patti, patra, N/M and O/M
In India, tractor body parts names are mostly the English ones, so bonnet, mudguard and footplate mean what they mean in the UK. However, some listings add a Hindi word. Patta and patti mean a strip or plate, and patra means a sheet. Our own catalogue uses three of them:
- Side bonnet patta: the bonnet side panel on a Swaraj.
- Dashboard lower patra: the lower dash panel on a Swaraj.
- Mudguard O/M patti wala: a Massey Ferguson 1035 mudguard pattern. “Wala” means “the one with”, so the name tells a dealer which pattern it is. Check the photo.
Two letters also appear after many Indian part names. N/M means new model and O/M means old model. They mark two versions of the same panel for one tractor. The difference is often small, so always match the photo to your tractor before you order. Our guide to N/M and O/M on tractor parts shows how to tell which one you need.
How to name a part when you ask for a quote
Tractor body parts names matter less than you think, because the factory needs the same five facts whatever name you use. Send them in your first message and you save a round of questions:
- Make and model: for example Massey Ferguson 35 3 cylinder, not only “MF”. If you are not sure, our guide on how to identify a Massey Ferguson 35 shows how to check the plate.
- The part, in any name: bonnet top, hood or patta are all fine. Add a photo of the old panel.
- Side: LH or RH, seen from the seat.
- Version: N/M or O/M where it applies, or the OEM part number the panel replaces, if you have it.
- Quantity and destination: pieces per part and the country of delivery.
Our minimum order is 5 pieces, and a sample is available on request. You can browse every panel by make and model in the tractor body parts catalogue.
Frequently asked questions
Mudguard or fender: is a tractor fender the same as a mudguard?
Yes. Fender is the American word and mudguard the British one. Both mean the steel cover over the rear wheel. Some UK catalogues also call it a wing.
What does tinwork mean on a tractor?
Tinwork is the UK name for all the pressed steel body panels: bonnet, side panels, grille, mudguards, footplates and dash. In the USA the same group is called sheet metal.
What is the difference between a nose cone and a grille?
The nose cone is the one-piece front shell on tractors such as the Fordson Major. The grille is the mesh that fits inside it or across the front. Ask for the nose cone when you need the whole shell.
What does patta mean on a tractor part?
Patta is a Hindi word for a strip or plate. In Indian listings a “side bonnet patta” is the bonnet side panel. Patra, a sheet, is used the same way, for example the dashboard lower patra.
Which side is LH on a tractor mudguard?
Left hand is your left as you sit in the seat and face forward. State LH or RH for each mudguard, side panel and footplate you order.
Tractor body parts names vary, but the panel does not. Not sure which name fits yours? Send a photo and the tractor model through our contact page, and we will reply within 24 to 48 hours on business days.
