Call Us On +91 70160 52536 | +91 96380 48338
Internamational: export@ajvamotors.com
Ajva Motors makes aftermarket tractor bonnet kits, sold in the USA as hood kits, at its own factory in Gujarat, India. A kit is the front end of the tractor as one order: the bonnet top with the panels made to fit it. We make kits for the Ferguson TE20, Massey Ferguson 35 3-cylinder and 135, and Swaraj 724 and N/M. The minimum order is 5 pieces.
These are the 5 bonnet kits in our catalogue. If you need only one panel, most parts in these kits are also sold on their own: see our bonnets and bonnet tops, side panels and front grilles. Open a kit for its photo and fitment, or the model for every panel we make for that tractor.
| Photo | Product | Brand and model | Fits | Finish colour |
|---|---|---|---|---|
| Ferguson TE20 Tractor Bonnet Kit | Ferguson TE20 | Ferguson TE20 | Red Oxide | |
| Massey Ferguson 135 Bonnet Kit | Massey Ferguson 135 | Massey Ferguson 135 | Red Oxide | |
| Massey Ferguson 35 Bonnet Kit 35 3-Cylinder | Massey Ferguson 35 3-Cylinder | Massey Ferguson 35 3-Cylinder (Pre 100 Series) | Red Oxide | |
| Swaraj Tractor 724 Bonnet Kit | Swaraj 724 | Swaraj 724 | Multi Color | |
| Swaraj Tractor Bonnet Kit N/M | Swaraj 735 | Swaraj new model (N/M): send your tractor model and a photo to confirm the fit | Multi Color |
A bonnet kit is a set of front-end panels for one tractor model, sold as one item. In the UK and Ireland it is also called a bonnet assembly or front-end tinwork. American parts lists say hood kit. On a vintage Ferguson or Massey Ferguson the set is built round the bonnet top, with the side panels, the grille and the lower front panel that close the sides and nose.
Buy a kit when the old front end is rusted through or missing, or the tractor is being rebuilt to show standard. Panels made as a set are made to meet, so seams and bolt holes line up more easily. Buy single panels when the rest of the tinwork is sound. An owner on TractorByNet who bolted new side panels and a new chin panel to an original MF 35 bonnet top found that the holes and lines did not match. That is the job a matched kit avoids.
"Bonnet kit" does not mean the same set of parts from one seller to the next. In the UK, Agriline sells two MF 135 kits: a bonnet kit with the bonnet top, the grille and panel kit and the upper grille, and a complete bonnet kit that adds the side panels, lower panel, lids, grille rubber, brackets and badges. Its TE20 bonnet kit needs two internal runners bought separately. Our photos show the Swaraj kits as separate panels and the vintage kits fitted together. Before you order, ask us for the itemised list of the kit you want.
One model name can need two different front ends. The Massey Ferguson 35 was built with four-cylinder and three-cylinder engines, and our MF 35 bonnet kit (part no. AME001) is for the 3-cylinder tractor. MF 135 parts lists split the front end by grille height, 13 inch or 14 inch. We also make a 13 inch grille side panel for the MF 133, 135 and 140, so measure your grille and say which you have. For Swaraj, the 724 kit and the N/M kit are different sets. Our note on N/M and O/M parts explains the marks.
Our product pages describe the steel panels only. A vintage front end also needs pivot bolts, grille studs, clips, lid handles and rubber strips; list any you need in your enquiry. Our MF 35 bonnet kit fitting guide lists them and gives a dry-fit routine. Each kit is painted: red oxide on the Ferguson and Massey Ferguson kits, and more than one colour on the Swaraj kits. Plan your top coat after a dry fit.
| Material | Steel sheet, pressed |
|---|---|
| Finish | Painted. Red oxide on the Ferguson and Massey Ferguson kits; more than one colour on the Swaraj kits, as each product page shows. |
| Supplied as | The front-end panels for one model as one item. Itemised list on request. |
| Single panels | Bonnet tops, side panels, grilles and lower front panels for the same models, sold on their own |
| Part numbers | Shown where we have one, such as AME001 for the MF 35 3-cylinder kit |
| Minimum order | 5 pieces per product, with a sample on request |
| Quote reply | 24 to 48 hours on business days |
| Made at | Kotadi, near Chhapi, Banaskantha, Gujarat, India, since 1998 |
Our buyers are in the UK, Ireland, the USA, the Netherlands, France, Serbia, Kosovo, New Zealand and Africa. Dealers often order a model's kit and its single panels together, so one shipment covers full rebuilds and repairs. We quote FOB India, CFR or CIF.
A kit is the bulkiest item in a body parts order, so give the quantity of each kit in your first enquiry. You receive a commercial invoice and a packing list with each shipment. Body panels for tractors are usually classed under tariff heading 8708; UK importers can check the UK Trade Tariff, and your customs agent confirms the code.
To complete the order, browse the tractor body parts catalogue by brand and model, or see our mudguards (fenders), front grilles, bonnets (hoods), bonnet side panels, footplates, tool boxes and battery covers and dashboards and dash panels. Our Ferguson TE20 bonnet kit guide covers that model in more detail. The export page explains each step from enquiry to shipping.
Submit your wholesale request below and we'll pick it up on WhatsApp right away.
Tractor Body Parts Manufacturer & Exporter