Tractor Footplate Manufacturer in India

Ajva Motors makes aftermarket tractor footplates, called step plates in American parts lists, at its factory in Gujarat, India. We press them from steel sheet, supply them painted as left and right pairs, and make them for the Ferguson TE20 and FE35, the Massey Ferguson 35, 65, 135 and 835, and the Swaraj 735. The minimum order is 5 pieces.

Massey Ferguson 135 footplate kit: left and right steel plates with raised slots, four mounting brackets, two supports and fixings, in red oxide

Every Tractor Footplate We Make

These are the 4 footplates in our catalogue. Each one is a pair, a left plate and a right plate, and the two Massey Ferguson kits also include the brackets that hold the plates. Open a product for its photo and fitment, or the model for every panel we make for that tractor.

Photo Product Brand and model Fits Finish colour
Massey Ferguson FE35 TE20 TEA TED 35 Tractor Footplate Ferguson TE20 Ferguson TE20, Ferguson TEA, Ferguson TED, Ferguson FE35, Massey Ferguson 35 Gray Oxide
Massey Ferguson 135 Footplate Kit Massey Ferguson 135 Massey Ferguson 135 Red Oxide
Massey Ferguson 35 3-Cylinder Footplate Kit Part no. AME006 Replaces OEM 180717M91, 191929M92, 890353M91 Massey Ferguson 35 3-Cylinder Massey Ferguson 35 3-Cylinder, Massey Ferguson 35 Petrol, Massey Ferguson 65 (Pre 100 Series), Massey Ferguson 835 (French 800 Series), replaces OEM 180717M91, 191929M92, 890353M91 Red Oxide
Swaraj Tractor 735 Footplate Swaraj 735 Swaraj 735 Cream Metallic Tint

Footplate, Footboard or Step Plate

The footplate is the steel platform the driver stands on, one each side of the gearbox, between the front of the rear mudguard and the clutch and brake pedals. It is also the step you climb up on. UK and Irish catalogues call it a footplate or footboard. Sparex, a parts brand sold in many countries, lists the same part as a footplate on its UK site and a step plate on its US site. Some sellers say running board.

Footplates wear in a way no other panel does. They take boots, mud, water and fertiliser every working day, and water sits where the plate meets its brackets. That is where they rust through first, and a footplate that gives way under a boot is a safety problem, not only a cosmetic one.

Three Things to Check Before You Order Footplates

1. Left and right are different parts

A footplate is never one part number. The left plate clears the clutch pedal and the right plate clears the brake pedals, so the two are cut differently. Sparex sells the Massey Ferguson 135 plates as a separate left and right part. Our Swaraj 735 footplate shows it clearly: the two plates have different outlines and cut-outs. We supply every footplate as a pair.

2. Tread: raised pattern or holes

The tread is what a restorer looks at. The Ferguson Enthusiasts of North America note that Ferguson step plates came in several patterns, including holes with a raised ridge and a diamond tread, and that UK TE20 plates differ from American TO30 and TO35 plates. Our range has four. The MF 35 kit has raised round dimples, the MF 135 kit has raised slots set at an angle, and the Swaraj 735 plates have rows of raised pads. The Ferguson TE20 and FE35 footplate is punched with holes and turns up at the rear edge. Compare the photo with your old plate.

3. Brackets, pedals and mudguards

The plate is only as good as what holds it. Our MF 35 and MF 135 kits come with their mounting brackets, and the MF 135 kit with fixings, because old brackets are often too rusty to reuse. Check two things on the tractor. First, whether it has a foot throttle: Agriline, a UK seller, notes that its MF 35 and 135 foot plate set needs extra parts on tractors without one. Second, whether it has standard or extension mudguards, because the mudguard bolts close to the plate. Our MF 35 kit replaces OEM 180717M91, 191929M92 and 890353M91; if your number differs, send it to us.

Massey Ferguson 35 footplate kit, part AME006: two tapered plates with raised round dimples and five mounting brackets, in red oxide
Dimpled plates and brackets, MF 35
Swaraj 735 footplates: left and right steel plates of different shapes with rows of raised pads, in cream
Left and right differ, Swaraj 735
Ferguson TE20 and FE35 footplates: two perforated steel plates with an upturned rear edge, two support bars and bolts, in grey oxide
Perforated plates, Ferguson TE20 and FE35

Footplate Specifications

MaterialSteel sheet, pressed. Brackets and supports in steel.
Supplied asLeft and right pair. MF 35 and MF 135 kits include mounting brackets; the MF 135 kit includes fixings.
TreadRaised dimples, raised slots, raised pads or punched holes, by model
FinishPainted. Red oxide on the MF 35 and MF 135 kits, grey oxide on the Ferguson TE20 and FE35 plates, cream on the Swaraj 735. Each product page shows its colour.
Part numbersShown where we have one, such as AME006 (replaces OEM 180717M91, 191929M92 and 890353M91)
Minimum order5 pieces per product, with a sample on request
Quote reply24 to 48 hours on business days
Made atKotadi, near Chhapi, Banaskantha, Gujarat, India, since 1998
Inside the Ajva Motors factory at Kotadi, Gujarat, with body panels on the racks
Inside our factory at Kotadi, Gujarat

Ordering Footplates for Export

Our buyers are in the UK, Ireland, the USA, the Netherlands, France, Serbia, Kosovo, New Zealand and Africa. Footplates rust at the same rate as the panels next to them, so dealers often order them with the rear mudguards and the tool box of the same model. We quote FOB India, CFR or CIF.

List each footplate pair as its own line in your enquiry, with the quantity. Each shipment comes with a commercial invoice and a packing list. Tractor body parts are usually classed under tariff heading 8708; UK importers can look it up in the UK Trade Tariff, and the customs agent confirms the final code.

Browse the tractor body parts catalogue by brand and model, or see our mudguards (fenders), front grilles, bonnets (hoods), bonnet side panels, bonnet kits, tool boxes and battery covers and dashboards and dash panels. The export page explains each step from enquiry to shipping.

Tractor Footplates: Common Questions

Is a footplate the same as a step plate or footboard?
Do you sell the left and right footplates separately?
Which footplate fits a Massey Ferguson 35?
Are the mounting brackets included?
What should I send to get a footplate quote?

Request a Tractor Body Parts Export Quote

Submit your wholesale request below and we'll pick it up on WhatsApp right away.

Click to upload file (PDF, JPG, PNG, CAD - Max 10MB)

AJVA Motors

Tractor Body Parts Manufacturer & Exporter