Tractor Bonnet Manufacturer in India

Ajva Motors makes aftermarket tractor bonnets, called hoods in the USA, at its own factory in Gujarat, India. The range covers bonnet tops and one-piece bonnets for the Ferguson TE20, Ford 8N, Massey Ferguson 35, 135 and 1035, and Swaraj 724 and 735. Each is pressed from steel sheet and painted. The minimum order is 5 pieces.

Massey Ferguson 35X 3-cylinder bonnet top with hinged lid in red oxide finish

Every Tractor Bonnet We Make

These are the 7 bonnets and bonnet tops in our catalogue. Each is sold on its own. For the top, side panels and grille sold together, see our bonnet kits. Open a product for its photo and fitment, or the model for every panel we make for that tractor.

Photo Product Brand and model Fits Finish colour
Ferguson TE20 Bonnet Top Ferguson TE20 Ferguson TE20 Red Oxide
Ford 8N Tractor Bonnet Ford 8N Ford 8N Gray Oxide
Massey Ferguson 135 Bonnet Top Massey Ferguson 135 Massey Ferguson 135 Red Oxide
Massey Ferguson 35X Bonnet Top 35 3-Cylinder Part no. AME002 Replaces OEM Massey Ferguson 1861842M91 Massey Ferguson 35 3-Cylinder Massey Ferguson 35 3-Cylinder and 35X (Pre 100 Series), replaces OEM 1861842M91 Red Oxide
Massey Ferguson 1035 Bonnet Massey 1035 Massey Ferguson 1035 Red Oxide
Swaraj Tractor 724 Bonnet Top Swaraj 724 Swaraj 724 Red Oxide
Swaraj Tractor Bonnet Top N/M Swaraj 735 Swaraj 735 (new model, N/M) Blue Oxide

Bonnet, Hood or Bonnet Top

A bonnet is the steel cover over the engine. UK, Irish and Indian buyers call it a bonnet. American parts lists call it a hood, so the Ford 8N part is sold in the USA as an 8N hood. UK restorers often group the bonnet, side panels, grille and mudguards together as tinwork or sheet metal. Our guide to tractor body part names in the UK, US and India lists the rest.

On most tractors the bonnet is not one part. The bonnet top runs along the top of the engine. The side panels, called side patta in India, close the sides, and the front grille closes the nose. A one-piece bonnet combines some of these. Our Massey Ferguson 1035 bonnet, for example, also forms the nose, with an opening for the grille.

Three Things to Check Before You Order Bonnets

1. Same model name, different bonnet

One model name can cover two or three bonnets. The Massey Ferguson 35 was built with four-cylinder and three-cylinder engines, and UK parts lists give its bonnets different OEM numbers. Our MF 35X bonnet top is for the 3-cylinder tractor and replaces OEM 1861842M91. Swaraj has the same issue: we make a 724 bonnet top and a separate N/M bonnet top for the 735. Our note on N/M and O/M parts explains the new model and old model marks.

2. Match the holes and openings

A bonnet has cut-outs for the exhaust, the air intake, the fuel filler or a lid, and they have to line up with your engine. Both Swaraj tops have a round hole at one end. The Ford 8N hood has a side opening for the air cleaner that the earlier 9N and 2N did not have, which is why US dealers such as Yesterday's Tractors sell an air cleaner door with the 8N hood for those models. Compare the openings on our product photo with your tractor before you order.

3. Know what comes with the panel

Each product on this page is the steel bonnet or bonnet top on its own. On vintage tractors the bonnet also needs fixings: pivot bolts, a catch or handle, and on the Ferguson TE20 a rubber strip between the bonnet and the dash. Check whether you have reusable fixings, and list any you need in your enquiry. If you are rebuilding the whole front end, a bonnet kit with the top, sides and grille is usually simpler to order.

Massey Ferguson 1035 one-piece bonnet with grille opening in red oxide finish
One-piece bonnet, MF 1035
Ford 8N tractor hood with hinged lid open, in grey oxide finish
Hood with hinged lid, Ford 8N
Swaraj N/M flat bonnet top with round hole at one end, in blue oxide finish
Flat bonnet top, Swaraj N/M
Ferguson TE20 rounded bonnet top in red oxide finish
Rounded bonnet top, Ferguson TE20

Bonnet Specifications

MaterialSteel sheet, pressed
FinishPainted. Each product page gives the colour: red oxide, grey oxide or blue oxide.
Supplied asThe bonnet or bonnet top named, on its own. Top, sides and grille together are sold as a bonnet kit.
Part numbersShown where we have one, with the OEM number of the original bonnet it replaces
Minimum order5 pieces per product, with a sample on request
Quote reply24 to 48 hours on business days
Made atKotadi, near Chhapi, Banaskantha, Gujarat, India, since 1998
Inside the Ajva Motors factory at Kotadi, Gujarat, with body panels on the racks
Inside our factory at Kotadi, Gujarat

Ordering Bonnets for Export

Our buyers are in the UK, Ireland, the USA, the Netherlands, France, Serbia, Kosovo, New Zealand and Africa. A bonnet is a large, light panel, so most buyers add bonnets to a mixed order with mudguards, grilles and footplates for the same models rather than ship them alone. We quote FOB India, CFR or CIF.

You receive a commercial invoice and a packing list with each shipment. Body panels for tractors are usually classed under tariff heading 8708. UK importers can look up the code on the UK Trade Tariff, and your customs agent confirms it.

To build a full order, browse the tractor body parts catalogue by brand and model, or see our mudguards (fenders), front grilles, bonnet side panels, bonnet kits, footplates, tool boxes and battery covers and dashboards and dash panels. The export page explains each step from enquiry to shipping.

Tractor Bonnets: Common Questions

Is a tractor bonnet the same as a hood?
Do you sell the bonnet top on its own?
Which bonnet fits a Massey Ferguson 35?
Does the Ford 8N bonnet fit a 9N or 2N?
What should I send to get a bonnet quote?

Request a Tractor Body Parts Export Quote

Submit your wholesale request below and we'll pick it up on WhatsApp right away.

Click to upload file (PDF, JPG, PNG, CAD - Max 10MB)

AJVA Motors

Tractor Body Parts Manufacturer & Exporter