Tractor Bonnet Kit Manufacturer in India

Ajva Motors makes aftermarket tractor bonnet kits, sold in the USA as hood kits, at its own factory in Gujarat, India. A kit is the front end of the tractor as one order: the bonnet top with the panels made to fit it. We make kits for the Ferguson TE20, Massey Ferguson 35 3-cylinder and 135, and Swaraj 724 and N/M. The minimum order is 5 pieces.

Massey Ferguson 35 3-cylinder bonnet kit assembled: bonnet top, side panel, louvred grille and lower front panel in red oxide

Every Tractor Bonnet Kit We Make

These are the 5 bonnet kits in our catalogue. If you need only one panel, most parts in these kits are also sold on their own: see our bonnets and bonnet tops, side panels and front grilles. Open a kit for its photo and fitment, or the model for every panel we make for that tractor.

Photo Product Brand and model Fits Finish colour
Ferguson TE20 Tractor Bonnet Kit Ferguson TE20 Ferguson TE20 Red Oxide
Massey Ferguson 135 Bonnet Kit Massey Ferguson 135 Massey Ferguson 135 Red Oxide
Massey Ferguson 35 Bonnet Kit 35 3-Cylinder Part no. AME001 Massey Ferguson 35 3-Cylinder Massey Ferguson 35 3-Cylinder (Pre 100 Series) Red Oxide
Swaraj Tractor 724 Bonnet Kit Swaraj 724 Swaraj 724 Multi Color
Swaraj Tractor Bonnet Kit N/M Swaraj 735 Swaraj new model (N/M): send your tractor model and a photo to confirm the fit Multi Color

What a Bonnet Kit Is, and When to Buy One

A bonnet kit is a set of front-end panels for one tractor model, sold as one item. In the UK and Ireland it is also called a bonnet assembly or front-end tinwork. American parts lists say hood kit. On a vintage Ferguson or Massey Ferguson the set is built round the bonnet top, with the side panels, the grille and the lower front panel that close the sides and nose.

Buy a kit when the old front end is rusted through or missing, or the tractor is being rebuilt to show standard. Panels made as a set are made to meet, so seams and bolt holes line up more easily. Buy single panels when the rest of the tinwork is sound. An owner on TractorByNet who bolted new side panels and a new chin panel to an original MF 35 bonnet top found that the holes and lines did not match. That is the job a matched kit avoids.

Three Things to Check Before You Order Bonnet Kits

1. Ask for the list of panels in the kit

"Bonnet kit" does not mean the same set of parts from one seller to the next. In the UK, Agriline sells two MF 135 kits: a bonnet kit with the bonnet top, the grille and panel kit and the upper grille, and a complete bonnet kit that adds the side panels, lower panel, lids, grille rubber, brackets and badges. Its TE20 bonnet kit needs two internal runners bought separately. Our photos show the Swaraj kits as separate panels and the vintage kits fitted together. Before you order, ask us for the itemised list of the kit you want.

2. Match the kit to the tractor, not only the model name

One model name can need two different front ends. The Massey Ferguson 35 was built with four-cylinder and three-cylinder engines, and our MF 35 bonnet kit (part no. AME001) is for the 3-cylinder tractor. MF 135 parts lists split the front end by grille height, 13 inch or 14 inch. We also make a 13 inch grille side panel for the MF 133, 135 and 140, so measure your grille and say which you have. For Swaraj, the 724 kit and the N/M kit are different sets. Our note on N/M and O/M parts explains the marks.

3. Plan the fixings and the finish

Our product pages describe the steel panels only. A vintage front end also needs pivot bolts, grille studs, clips, lid handles and rubber strips; list any you need in your enquiry. Our MF 35 bonnet kit fitting guide lists them and gives a dry-fit routine. Each kit is painted: red oxide on the Ferguson and Massey Ferguson kits, and more than one colour on the Swaraj kits. Plan your top coat after a dry fit.

Ferguson TE20 bonnet kit assembled: rounded bonnet top, side panel and louvred grille in red oxide
Assembled front end, Ferguson TE20
Massey Ferguson 135 bonnet kit assembled: bonnet top, front grille with MF badge and lower grille panel
Assembled front end, MF 135
Swaraj 724 bonnet kit laid out as separate panels: bonnet top, two side panels, grille in its frame and front panels
Kit as separate panels, Swaraj 724
Swaraj N/M bonnet kit laid out as separate panels in blue and white, with the headlight panel in front
Kit as separate panels, Swaraj N/M

Bonnet Kit Specifications

MaterialSteel sheet, pressed
FinishPainted. Red oxide on the Ferguson and Massey Ferguson kits; more than one colour on the Swaraj kits, as each product page shows.
Supplied asThe front-end panels for one model as one item. Itemised list on request.
Single panelsBonnet tops, side panels, grilles and lower front panels for the same models, sold on their own
Part numbersShown where we have one, such as AME001 for the MF 35 3-cylinder kit
Minimum order5 pieces per product, with a sample on request
Quote reply24 to 48 hours on business days
Made atKotadi, near Chhapi, Banaskantha, Gujarat, India, since 1998
Inside the Ajva Motors factory at Kotadi, Gujarat, with body panels on the racks
Inside our factory at Kotadi, Gujarat

Ordering Bonnet Kits for Export

Our buyers are in the UK, Ireland, the USA, the Netherlands, France, Serbia, Kosovo, New Zealand and Africa. Dealers often order a model's kit and its single panels together, so one shipment covers full rebuilds and repairs. We quote FOB India, CFR or CIF.

A kit is the bulkiest item in a body parts order, so give the quantity of each kit in your first enquiry. You receive a commercial invoice and a packing list with each shipment. Body panels for tractors are usually classed under tariff heading 8708; UK importers can check the UK Trade Tariff, and your customs agent confirms the code.

To complete the order, browse the tractor body parts catalogue by brand and model, or see our mudguards (fenders), front grilles, bonnets (hoods), bonnet side panels, footplates, tool boxes and battery covers and dashboards and dash panels. Our Ferguson TE20 bonnet kit guide covers that model in more detail. The export page explains each step from enquiry to shipping.

Tractor Bonnet Kits: Common Questions

What is the difference between a bonnet kit and a bonnet?
Is a bonnet kit the same as a hood kit?
Does the MF 35 bonnet kit fit the four-cylinder FE35?
Do the bonnet kits come with bolts, handles and rubbers?
What should I send to get a bonnet kit quote?

Request a Tractor Body Parts Export Quote

Submit your wholesale request below and we'll pick it up on WhatsApp right away.

Click to upload file (PDF, JPG, PNG, CAD - Max 10MB)

AJVA Motors

Tractor Body Parts Manufacturer & Exporter